Remarkable heat conduction mediated by non-equilibrium phonon polaritons.

Surface waves can lead to intriguing transport phenomena. In particular, surface phonon polaritons (SPhPs), which result from coupling between infrared light and optical phonons, have been predicted to contribute to heat conduction along polar thin films and nanowires1. However, experimental efforts so far suggest only very limited SPhP contributions2-5. Through systematic measurements of thermal transport along the same 3C-SiC nanowires with and without a gold coating on the end(s) that serves to launch SPhPs, here we show that thermally excited SPhPs can substantially enhance the thermal conductivity of the uncoated portion of these wires. The extracted pre-decay SPhP thermal conductance is more than two orders of magnitude higher than the Landauer limit predicted on the basis of equilibrium Bose-Einstein distributions. We attribute the notable SPhP conductance to the efficient launching of non-equilibrium SPhPs from the gold-coated portion into the uncoated SiC nanowires, which is strongly supported by the observation that the SPhP-mediated thermal conductivity is proportional to the length of the gold coating(s). The reported discoveries open the door for modulating energy transport in solids by introducing SPhPs, which can effectively counteract the classical size effect in many technologically important films and improve the design of solid-state devices.

Efficient machine learning of solute segregation energy based on physics-informed features.

Machine learning models solute segregation energy based on appropriate features of segregation sites. Lumping many features together can give a decent accuracy but may suffer the curse of dimensionality. Here, we modeled the segregation energy with efficient machine learning using physics-informed features identified based on solid physical understanding. The features outperform the many features used in the literature work and the spectral neighbor analysis potential features by giving the best balance between accuracy and feature dimension, with the extent depending on machine learning algorithms and alloy systems. The excellence is attributed to the strong relevance to segregation energies and the mutual independence ensured by physics. In addition, the physics-informed features contain much less redundant information originating from the energy-only-concerned calculations in equilibrium states. This work showcases the merit of integrating physics in machine learning from the perspective of feature identification other than that of physics-informed machine learning algorithms.

Guided Polaritons along the Forbidden Direction in MoO3 with Geometrical Confinement.

Highly anisotropic materials show great promise for spatial control and the manipulation of polaritons. In-plane hyperbolic phonon polaritons (HPhPs) supported by α-phase molybdenum trioxide (MoO3) allow for wave propagation with a high directionality due to the hyperbola-shaped isofrequency contour (IFC). However, the IFC prohibits propagations along the [001] axis, hindering information or energy flow. Here, we illustrate a novel approach to manipulating the HPhP propagation direction. We experimentally demonstrate that geometrical confinement in the [100] axis can guide HPhPs along the forbidden direction with phase velocity becoming negative. We further developed an analytical model to provide insights into this transition. Moreover, as the guided HPhPs are formed in-plane, modal profiles were directly imaged to further expand our understanding of the formation of HPhPs. Our work reveals a possibility for manipulating HPhPs and paves the way for promising applications in metamaterials, nanophotonics, and quantum optics based on natural van der Waals materials.

Launching and Manipulation of Higher-Order In-Plane Hyperbolic Phonon Polaritons in Low-Dimensional Heterostructures.

Hyperbolic phonon polaritons (HPhPs) are stimulated by coupling infrared (IR) photons with the polar lattice vibrations. Such HPhPs offer low-loss, highly confined light propagation at subwavelength scales with out-of-plane or in-plane hyperbolic wavefronts. For HPhPs, while a hyperbolic dispersion implies multiple propagating modes with a distribution of wavevectors at a given frequency, so far it has been challenging to experimentally launch and probe the higher-order modes that offer stronger wavelength compression, especially for in-plane HPhPs. In this work, the experimental observation of higher-order in-plane HPhP modes stimulated on a 3C-SiC nanowire (NW)/α-MoO3 heterostructure is reported where leveraging both the low-dimensionality and low-loss nature of the polar NWs, higher-order HPhPs modes within 2D α-MoO3 crystal are launched by the 1D 3C-SiC NW. The launching mechanism is further studied and the requirements for efficiently launching of such higher-order modes are determined. In addition, by altering the geometric orientation between the 3C-SiC NW and α-MoO3 crystal, the manipulation of higher-order HPhP dispersions as a method of tuning is demonstrated. This work illustrates an extremely anisotropic low dimensional heterostructure platform to confine and configure electromagnetic waves at the deep-subwavelength scales for a range of IR applications including sensing, nano-imaging, and on-chip photonics.

Enhanced Electron Correlation and Significantly Suppressed Thermal Conductivity in Dirac Nodal-Line Metal Nanowires by Chemical Doping.

Enhancing electron correlation in a weakly interacting topological system has great potential to promote correlated topological states of matter with extraordinary quantum properties. Here, the enhancement of electron correlation in a prototypical topological metal, namely iridium dioxide (IrO2 ), via doping with 3d transition metal vanadium is demonstrated. Single-crystalline vanadium-doped IrO2 nanowires are synthesized through chemical vapor deposition where the nanowire yield and morphology are improved by creating rough surfaces on substrates. Vanadium doping leads to a dramatic decrease in Raman intensity without notable peak broadening, signifying the enhancement of electron correlation. The enhanced electron correlation is further evidenced by transport studies where the electrical resistivity is greatly increased and follows an unusual T $\sqrt T $ dependence on the temperature (T). The lattice thermal conductivity is suppressed by an order of magnitude via doping even at room temperature where phonon-impurity scattering becomes less important. Density functional theory calculations suggest that the remarkable reduction of thermal conductivity arises from the complex phonon dispersion and reduced energy gap between phonon branches, which greatly enhances phase space for phonon-phonon Umklapp scattering. This work demonstrates a unique system combining 3d and 5d transition metals in isostructural materials to enrich the system with various types of interactions.

InDelGT: An integrated pipeline for extracting indel genotypes for genetic mapping in a hybrid population using next-generation sequencing data.

Premise: Although several software packages are available for genotyping insertion/deletion (indel) polymorphisms in genomes using next-generation sequencing data, simultaneously calling indel genotypes across many individuals for use in genetic mapping remains challenging. Methods and Results: We present an integrated pipeline, InDelGT, for the extraction of indel genotypes from a segregating population such as backcross or F2 lines, or from an F1 cross between outbred species. The InDelGT algorithm is implemented in three steps: generating an indel catalog, calling indel genotypes, and analyzing indel segregation. We demonstrated the use of the pipeline with an example data set from an F1 hybrid population of Populus and successfully constructed the two parental genetic linkage maps. Conclusions: InDelGT is a practical tool that can quickly genotype a large number of indel markers within a population following Mendelian segregation. The InDelGT pipeline is freely available on GitHub (https://github.com/tongchf/InDelGT).

Application of yellow mustard mucilage and starch in nanoencapsulation of thymol and carvacrol by emulsion electrospray.

Starch/water soluble yellow mustard mucilage nanocapsules loaded with thymol and carvacrol (TC) were developed using electrospray atomization. Emulsions were electrosprayed, aiming to generate nanocapsules with a controlled release behavior of TC for antimicrobial packaging applications. To understand the effect of water soluble yellow mustard mucilage (WSM) on the nanocapsules, the emulsion viscosity, morphology, encapsulation efficiency, molecular interactions, and release kinetics were evaluated. Surface and internal morphological analysis revealed that nanocapsules were non-porous with minimal surface shrinkages and had inner multicore spheres within a solid wall layer. Encapsulation efficiency ranged from 61.17 to 84.10 %, increasing at higher TC contents. Fourier transform spectroscopy confirmed the molecular interaction between wall materials. The release kinetics of encapsulated TC (30 % w/w) followed a Fickian diffusion mechanism and a controlled release pattern up to 120 h. Results indicated that the addition of WSM can modulate the release kinetics of bioactives and achieve a controlled release pattern.

A Novel Strategy for Constructing an Integrated Linkage Map in an F1 Hybrid Population of Populus deltoides and Populus simonii.

The genetic linkage maps of the traditional F2 population in inbred lines were estimated from the frequency of recombination events in both parents, providing full genetic information for genetic and genomic studies. However, in outbred forest trees, it is almost impossible to generate the F2 population because of their high heterozygosity and long generation times. We proposed a novel strategy to construct an integrated genetic linkage map that contained both parental recombination information, with restriction-site-associated DNA sequencing (RADSeq) data in an F1 hybrid population of Populus deltoides and Populus simonii. We selected a large number of specific RAD tags to construct the linkage map, each of which contained two SNPs, one heterozygous only in the female parent and the other heterozygous only in the male. Consequently, the integrated map contained a total of 1154 RAD tags and 19 linkage groups, with a total length of 5255.49 cM and an average genetic distance of 4.63 cM. Meanwhile, the two parent-specific linkage maps were also constructed with SNPs that were heterozygous in one parent and homozygous in the other. We found that the integrated linkage map was more consensus with the genomic sequences of P. simonii and P. deltoides. Additionally, the likelihood of the marker order in each linkage group of the integrated map was greater than that in both parental maps. The integrated linkage map was more accurate than the parent-specific linkage maps constructed in the same F1 hybrid population, providing a powerful genetic resource for identifying the quantitative trait loci (QTLs) with dominant effects, assembling genomic sequences, and performing comparative genomics in related Populus species. More importantly, this novel strategy can be used in other outbred species to build an integrated linkage map.

Dynamic Observation of Retinal Response to Pressure Elevation in a Microfluidic Chamber.

Dynamic observation of cell and tissue responses to elevated pressure could help our understanding of important physiological and pathological processes related to pressure-induced injury. Here, we report on a microfluidic platform capable of maintaining a wide range of stable operating pressures (30 to 200 mmHg) while using a low flowrate (2-14 µL/h) to limit shear stress. This is achieved by forcing flow through a porous resistance matrix composed of agarose gel downstream of a microfluidic chamber. The flow characteristics were investigated and the permeabilities of the agarose with four different concentrations were extracted, agreeing well with results found in the literature. To demonstrate the capability of the device, we measured the change in intracellular Ca2+ levels of retinal ganglion cells in whole mouse retina in response to pressure. The onset of enhanced pressure results in, on average, an immediate 119.16% increase in the intracellular Ca2+ levels of retinal ganglion cells. The demonstrated microfluidic platform could be widely used to probe cell and tissue responses to elevated pressure.

A Novel Strategy to Reveal the Landscape of Crossovers in an F1 Hybrid Population of Populus deltoides and Populus simonii.

Although the crossover (CO) patterns of different species have been extensively investigated, little is known about the landscape of CO patterns in Populus because of its high heterozygosity and long-time generation. A novel strategy was proposed to reveal the difference of CO rate and interference between Populus deltoides and Populus simonii using their F1 hybrid population. We chose restriction site-associated DNA (RAD) tags that contained two SNPs, one only receiving the CO information from the female P. deltoides and the other from the male P. simonii. These RAD tags allowed us to investigate the CO patterns between the two outbred species, instead of using the traditional backcross populations in inbred lines. We found that the CO rate in P. deltoides was generally greater than that in P. simonii, and that the CO interference was a common phenomenon across the two genomes. The COs landscape of the different Populus species facilitates not only to understand the evolutionary mechanism for adaptability but also to rebuild the statistical model for precisely constructing genetic linkage maps that are critical in genome assembly in Populus. Additionally, the novel strategy could be applied in other outbred species for investigating the CO patterns.

Molecular Dynamics Simulation of Sintering Densification of Multi-Scale Silver Layer.

Based on molecular dynamics (MD), in this study, a model was established to simulate the initial coating morphology of silver paste by using a random algorithm, and the effects of different sizes of particles on sintering porosity were also analyzed. The MD result reveals that compared with the sintering process using large-scale silver particles, the sintering process using multi-scale silver particles would enhance the densification under the same sintering conditions, which authenticates the feasibility of adding small silver particles to large-scale silver particles in theory. In addition, to further verify the feasibility of the multi-scale sintering, a semi in-situ observation was prepared for a sintering experiment using micro-nano multi-scale silver paste. The feasibility of multi-scale silver sintering is proved by theoretical and experimental means, which can provide a meaningful reference for optimizing the sintering process and the preparation of silver paste for die-attach in powering electronics industry. In addition, it is hoped that better progress can be made on this basis in the future.

Visualization and validation of twin nucleation and early-stage growth in magnesium.

The abrupt occurrence of twinning when Mg is deformed leads to a highly anisotropic response, making it too unreliable for structural use and too unpredictable for observation. Here, we describe an in-situ transmission electron microscopy experiment on Mg crystals with strategically designed geometries for visualization of a long-proposed but unverified twinning mechanism. Combining with atomistic simulations and topological analysis, we conclude that twin nucleation occurs through a pure-shuffle mechanism that requires prismatic-basal transformations. Also, we verified a crystal geometry dependent twin growth mechanism, that is the early-stage growth associated with instability of plasticity flow, which can be dominated either by slower movement of prismatic-basal boundary steps, or by faster glide-shuffle along the twinning plane. The fundamental understanding of twinning provides a pathway to understand deformation from a scientific standpoint and the microstructure design principles to engineer metals with enhanced behavior from a technological standpoint.

Bidirectional Modulation of Contact Thermal Resistance between Boron Nitride Nanotubes from a Polymer Interlayer.

Enhancing the thermal conductivity of polymer composites could improve their performance in applications requiring fast heat dissipation. While significant progress has been made, a long-standing issue is the contact thermal resistance between the nanofillers, which could play a critical role in the composite thermal properties. Through systematic studies of contact thermal resistance between individual boron nitride nanotubes (BNNTs) of different diameters, with and without a poly(vinylpyrrolidone) (PVP) interlayer, we show that the contact thermal resistance between bare BNNTs is largely determined by reflection of ballistic phonons. Interestingly, it is found that a PVP interlayer can either enhance or reduce the contact thermal resistance, as a result of converting the ballistic phonon dominated transport into diffusion through the PVP layer. These results disclose a previously unrecognized physical picture of thermal transport at the contact between BNNTs, which provides insights into the design of high thermal conductivity BNNT-polymer composites.

Ternary Si-SiO-Al Composite Films as High-Performance Anodes for Lithium-Ion Batteries.

Silicon (Si) is a promising anode material for lithium-ion batteries but has long been suffering from low conductivity, drastic volume change, poor cycling performance, etc. Adding SiO, Al, etc. to form Si-based binary composite films can improve some properties but have to give up others. Here, we prepared a ternary Si-SiO-Al composite film anode by adding SiO and Al together into Si using magnetron sputtering. This film has an extraordinary combination of conductivity, specific capacity, cycling stability, rate performance, etc., when compared with its binary and unary counterparts. While both SiO and Al can separately mitigate anode cracking resulting from the huge volume expansion during the lithiation/delithiation cycling process, the synergetic effect of adding SiO and Al together to form a ternary composite film can produce much better results. This film maintains an island structure that can efficiently buffer the volume expansion during the cycling process, giving rise to superior cycling performance and excellent rate performance. In addition, the cosputtered Al improves the electrical conductivity of the anode at the same time. This unique combination of anode properties, together with the low cost, suggests that the Si-SiO-Al composite film has the potential to be commercialized as a binder-free anode for lithium-ion batteries. This work also provides an efficient means to modulate the anode properties with more degrees of freedom.

Contact Thermal Resistance between Silver Nanowires with Poly(vinylpyrrolidone) Interlayers.

Various nanofillers have been adopted to enhance the thermal conductivity of polymer nanocomposites. While it is widely believed that the contact thermal resistance between adjacent nanofillers can play an important role in limiting thermal conductivity enhancement of composite materials, lack of direct experimental data poses a significant challenge to perceiving the effects of these contacts. This study reports on direct measurements of thermal transport through contacts between silver nanowires (AgNWs) with a poly(vinylpyrrolidone) (PVP) interlayer. The results indicate that a PVP layer as thin as 4 nm can increase the total thermal resistance of the contact by up to an order of magnitude, when compared to bare AgNWs, even with a larger contact area. On the other hand, the thermal boundary resistance for PVP/silver interfaces could be significantly lower than that between polymer-carbon nanotubes (CNTs). Analyses based on these understandings further show why AgNWs could be more effective nanofillers than CNTs.

Observation of superdiffusive phonon transport in aligned atomic chains.

Fascinating phenomena can occur as charge and/or energy carriers are confined in one dimension1-4. One such example is the divergent thermal conductivity (κ) of one-dimensional lattices, even in the presence of anharmonic interatomic interactions-a direct consequence of the Fermi-Pasta-Ulam-Tsingou paradox proposed in 19555. This length dependence of κ, also known as superdiffusive phonon transport, presents a classical anomaly of continued interest6-9. So far the concept has remained purely theoretical, because isolated single atomic chains of sufficient length have been experimentally unattainable. Here we report on the observation of a length-dependent κ extending over 42.5 µm at room temperature for ultrathin van der Waals crystal NbSe3 nanowires. We found that κ follows a 1/3 power law with wire length, which provides experimental evidence pointing towards superdiffusive phonon transport. Contrary to the classical size effect due to phonon-boundary scattering, the observed κ shows a 25-fold enhancement as the characteristic size of the nanowires decreases from 26 to 6.8 nm while displaying a normal-superdiffusive transition. Our analysis indicates that these intriguing observations stem from the transport of one-dimensional phonons excited as a result of elastic stiffening with a fivefold enhancement of Young's modulus. The persistent divergent trend of the observed thermal conductivity with sample length reveals a real possibility of creating novel van der Waals crystal-based thermal superconductors with κ values higher than those of any known materials.

Genome Assembly of Salicaceae Populus deltoides (Eastern Cottonwood) I-69 Based on Nanopore Sequencing and Hi-C Technologies.

Populus deltoides has important ecological and economic values, widely used in poplar breeding programs due to its superior characteristics such as rapid growth and resistance to disease. Although the genome sequence of P. deltoides WV94 is available, the assembly is fragmented. Here, we reported an improved chromosome-level assembly of the P. deltoides cultivar I-69 by combining Nanopore sequencing and chromosome conformation capture (Hi-C) technologies. The assembly was 429.3 Mb in size and contained 657 contigs with a contig N50 length of 2.62 Mb. Hi-C scaffolding of the contigs generated 19 chromosome-level sequences, which covered 97.4% (418 Mb) of the total assembly size. Moreover, repetitive sequences annotation showed that 39.28% of the P. deltoides genome was composed of interspersed elements, including retroelements (23.66%), DNA transposons (6.83%), and unclassified elements (8.79%). We also identified a total of 44 362 protein-coding genes in the current P. deltoides assembly. Compared with the previous genome assembly of P. deltoides WV94, the current assembly had some significantly improved qualities: the contig N50 increased 3.5-fold and the proportion of gaps decreased from 3.2% to 0.08%. This high-quality, well-annotated genome assembly provides a reliable genomic resource for identifying genome variants among individuals, mining candidate genes that control growth and wood quality traits, and facilitating further application of genomics-assisted breeding in populations related to P. deltoides.

Defect-driven selective metal oxidation at atomic scale.

Nanoscale materials modified by crystal defects exhibit significantly different behaviours upon chemical reactions such as oxidation, catalysis, lithiation and epitaxial growth. However, unveiling the exact defect-controlled reaction dynamics (e.g. oxidation) at atomic scale remains a challenge for applications. Here, using in situ high-resolution transmission electron microscopy and first-principles calculations, we reveal the dynamics of a general site-selective oxidation behaviour in nanotwinned silver and palladium driven by individual stacking-faults and twin boundaries. The coherent planar defects crossing the surface exhibit the highest oxygen binding energies, leading to preferential nucleation of oxides at these intersections. Planar-fault mediated diffusion of oxygen atoms is shown to catalyse subsequent layer-by-layer inward oxide growth via atomic steps migrating on the oxide-metal interface. These findings provide an atomistic visualization of the complex reaction dynamics controlled by planar defects in metallic nanostructures, which could enable the modification of physiochemical performances in nanomaterials through defect engineering.

Net negative contributions of free electrons to the thermal conductivity of NbSe3 nanowires.

Understanding transport mechanisms of electrons and phonons, two major energy carriers in solids, are crucial for various engineering applications. It is widely believed that more free electrons in a material should correspond to a higher thermal conductivity; however, free electrons also scatter phonons to lower the lattice thermal conductivity. The net contribution of free electrons has been rarely studied because the effects of electron-phonon (e-ph) interactions on lattice thermal conductivity have not been well investigated. Here an experimental study of e-ph scattering in quasi-one-dimensional NbSe3 nanowires is reported, taking advantage of the spontaneous free carrier concentration change during charge density wave (CDW) phase transition. Contrary to the common wisdom that more free electrons would lead to a higher thermal conductivity, results show that during the depinning process of the condensed electrons, while the released electrons enhance the electronic thermal conductivity, the overall thermal conductivity decreases due to the escalated e-ph scattering. This study discloses how competing effects of free electrons result in unexpected trends and provides solid experimental data to dissect the contribution of e-ph scattering on lattice thermal conductivity. Lastly, an active thermal switch design is demonstrated based on tuning electron concentration through electric field.

Electrical and Thermal Transport through Silver Nanowires and Their Contacts: Effects of Elastic Stiffening.

Silver nanowires have been widely adopted as nanofillers in composite materials used for various applications. Electrical and thermal properties of these composites are critical for proper device operation, and highly depend on transport through the nanowires and their contacts, yet studies on silver nanowires have been limited to one or two samples and no solid data have been reported for individual contacts. Through systematic measurements of silver nanowires of different sizes, we show that the Lorenz number increases with decreasing wire diameter and has a higher value at wire contacts. Examination of the corresponding electrical and thermal conductivities indicates that these changes are due to contributions of phonons that become more important as a result of elastic stiffening. The derived contact thermal conductance per unit area between silver nanowires is ∼10 times that between carbon nanotubes. This helps to explain the more significant thermal conductivity enhancement of silver nanowires-based composites.